2023-12 |
Synergistic strengthening of aluminum with SiC by grain refinement and dispersion hardening |
Journal of the American Ceramic Society
|
2023-06 |
Influence of Cu and Mg Content on Recrystallization Behavior in Al-Zn-Mg-Cu-Based Alloy Sheets |
METALS AND MATERIALS INTERNATIONAL
|
2023-02 |
High-ductility aluminium alloys including small sub-grains with wide low angle boundary |
Journal of Alloys and Compounds
|
2023-01 |
Molecular Dynamics Study on Crack Propagation in Al Containing Mg–Si Clusters Formed during Natural Aging |
Materials
|
2022-12 |
Deformation behavior of a cold-rolled 7075 Al alloy sheet containing small sub-grains with wide low-angle boundaries |
Materials Science and Engineering: A
|
2022-10 |
Enhancement of creep resistance of pure magnesium by magnesiothermic reaction with TiO2 nanoparticles |
Materials Letters
|
2022-10 |
Influence of the Composition and Vacancy Concentration on Cluster Decomposition Behavior in Al-Si-Mg Alloy: A Kinetic Monte Carlo Study |
Materials
|
2022-07 |
Deformation behavior of an A356 alloy containing small sub-grains with wide low-angle boundary |
JOURNAL OF ALLOYS AND COMPOUNDS
|
2021-01 |
Improvement in the anisotropic mechanical properties and formability of Al?Si?Mg?Cu-based alloy sheets |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2020-07 |
Recrystallized fine grains induced by nanoparticles in Al–Si–Mg–Cu-based alloy sheets |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2019-11 |
Effect of cooling rate on the thermal and electrical conductivities of an A356 sand cast alloy |
JOURNAL OF ALLOYS AND COMPOUNDS
|
2019-03 |
Si phase modification on the elevated temperature mechanical properties of Al-Si hypereutectic alloys |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2019-03 |
Deformation behavior of nanocrystalline and ultrafine-grained CoCrCuFeNi high-entropy alloys |
JOURNAL OF MATERIALS RESEARCH
|
2019-01 |
Development of heat-treatable Al-5Mg alloy sheets with the addition of Zn |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2018-06 |
Phase boundary sliding of a reticular-structured Mg-O-9Al alloy |
JOURNAL OF ALLOYS AND COMPOUNDS
|
2018-05 |
Microstructure and mechanical properties of a die-cast Mg-9Al alloy containing oxygen atoms |
MATERIALS LETTERS
|
2018-02 |
Fatigue behavior of Al2024 alloy-matrix nanocomposites reinforced with multi-walled carbon nanotubes |
COMPOSITES PART B-ENGINEERING
|
2017-11 |
Strengthening and toughening behaviors of a Mg-9Al alloy containing oxygen atoms |
JOURNAL OF ALLOYS AND COMPOUNDS
|
2017-06 |
Reduced graphene oxide as a protection layer for Al |
APPLIED SURFACE SCIENCE
|
2016-12 |
Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures |
COMPOSITES PART B-ENGINEERING
|
2016-11 |
Development of press-and-sinter Al2024-based nanocomposites reinforced with multiwalled carbon nanotubes |
JOURNAL OF COMPOSITE MATERIALS
|
2016-09 |
Effect of wrapped Zn plate on the densification of Al-MWCNTs composites produced by cold pressing and liquid phase sintering |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2016-06 |
Mechanical properties of polytetrafluoroethylene composites reinforced with graphene nanoplatelets by solid-state processing |
COMPOSITES PART B-ENGINEERING
|
2016-03 |
Multi-functional magnesium alloys containing interstitial oxygen atoms |
SCIENTIFIC REPORTS
|
2015-11 |
Strengthening behavior of carbon/metal nanocomposites |
SCIENTIFIC REPORTS
|
2015-11 |
Deformation behavior of aluminum alloy matrix composites reinforced with few-layer graphene |
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
|
2015-10 |
Fabrication of tungsten-based composites by solid binder mixing and sintering |
POWDER TECHNOLOGY
|
2015-09 |
High-temperature diffusion processes in ultrafine-grained aluminum and its composites containing multi-walled carbon nanotubes |
JOURNAL OF COMPOSITE MATERIALS
|
2015-08 |
Mechanical damping behavior of Al/C60-fullerene composites with supersaturated AleC phases |
COMPOSITES PART B-ENGINEERING
|
2015-07 |
Microstructure refining of aluminum alloys using aluminothermic reaction with ZnO nanoparticles |
MATERIALS LETTERS
|
2015-06 |
Effect of sn on thermal conductivity of mg-5zn based alloys |
MATERIALS TRANSACTIONS
|
2015-02 |
Strengthening behavior of few-layered graphene/aluminum composites |
CARBON
|
2015-01 |
The effect of grain size on the mechanical properties of aluminum |
ARCHIVES OF METALLURGY AND MATERIALS
|
2014-08 |
The structure and properties of 2024 aluminum composites reinforced with TiO2 nanoparticles |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2014-07 |
Mechanical properties of aluminum-based nanocomposite reinforced with fullerenes |
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
|
2014-04 |
Micro-alloying assisted consolidation of aluminum/carbon nanotubes powder |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2014-03 |
The effect of the size and volume fraction of Zr2Cu on the sintering behavior of tungsten matrix composites during liquid-reactive sintering |
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
|
2014-02 |
Effect of the TiO2 nanoparticle size on the decomposition behaviors in aluminum matrix composites |
MATERIALS CHEMISTRY AND PHYSICS
|
2014-01 |
Effect of the interface layer on the mechanical behavior of TiO2 nanoparticle reinforced aluminum matrix composites |
JOURNAL OF COMPOSITE MATERIALS
|
2013-11 |
Creep Properties in TiO2 Nanoparticle Reinforced Aluminum Matrix Composites |
ADVANCED ENGINEERING MATERIALS
|
2013-10 |
Mechanical properties of Fe-based composites reinforced with multi-walled carbon nanotubes |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2013-10 |
Deformation behavior of a statically recrystallized Mg-Zn-MM alloy sheet |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2013-09 |
Strengthening behavior of chopped multi-walled carbon nanotube reinforced aluminum matrix composites |
MATERIALS CHARACTERIZATION
|
2013-08 |
Electrical and thermal conductivities of aluminum-based composites containing multi-walled carbon nanotubes |
JOURNAL OF COMPOSITE MATERIALS
|
2013-08 |
Evolution of the interfacial layer and its effect on mechanical properties in TiO2 nanoparticle reinforced aluminum matrix composites |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2013-07 |
Formation of an interstitially alloyed phase in Mg/C-60 composite |
Metals and Materials International
|
2013-06 |
Development of ZrC in the tungsten matrix composite containing Zr2Cu and MWCNTs during liquid-reactive sintering |
INTERNATIONAL JOURNAL OF NANOTECHNOLOGY
|
2012-07 |
The effect of milling conditions on microstructures and mechanical properties of Al/MWCNT composites |
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
|
2012-02 |
Texture Development and Deformation Behavior of a Statically Recrystallized Mg-Al-Zn Alloy Sheet |
Metals and Materials International
|
2011-10 |
Grain size effect on the strengthening behavior of aluminum-based composites containing multi-walled carbon nanotubes |
COMPOSITES SCIENCE AND TECHNOLOGY
|
2011-08 |
Creep properties of aluminum-based composite containing multi-walled carbon nanotubes |
SCRIPTA MATERIALIA
|
2011-07 |
Strengthening in nanostructured 2024 aluminum alloy and its composites containing carbon nanotubes |
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
|
2011-07 |
The enhancement of warm-temperature mechanical properties of ultrafine-grained aluminum by carbon nanotubes |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2011-06 |
Fabrication of Supersaturated Cu-Sn Alloy Sheets and their Antibacterial Properties |
Metals and Materials International
|
2011-03 |
Strengthening and toughening of aluminum by single-walled carbon nanotubes |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2011-01 |
The Electrochemical Properties of Lithium/Sulfur Cell Using Sulfur-Carbon Nanotubes Composite |
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
|
2010-12 |
Wear characteristic of aluminum-based composites containing multi-walled carbon nanotubes |
Wear
|
2010-11 |
Self-assembled network structures in Al/C-60 composites |
Carbon
|
2010-03 |
Deformation behavior of magnesium in the grain size spectrum from nano- to micrometer |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2010-02 |
Electrical Conductive Epoxy Composites Containing Cilia-Like Powders Fabricated by Mechanical Milling |
Metals and Materials International
|
2010-02 |
Deformation behavior of Al-Si alloy based nanocomposites reinforced with carbon nanotubes |
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
|
2010-02 |
Fabrication and Mechanical Characterization of the Mg-Zn-RE/Al1050 Clad Sheet |
KOREAN JOURNAL OF METALS AND MATERIALS
|
2009-08 |
Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites |
Journal Of Materials Research
|
2009-04 |
Microstructure and Deformation Behavior of a Mg-RE-Zn-Al Alloy Reinforced with the Network of a Mg-RE Phase |
Metals and Materials International
|
2009-03 |
Positive Deviation from a Hall-Petch Relation in Nanocrystalline Aluminum |
Materials Transactions
|
2008-11 |
Tensile behavior of bulk nanocrystalline aluminum synthesized by hot extrusion of ball-milled powders |
Scripta Materialia
|
2008-08 |
Reinforcement with carbon nanotubes in aluminum matrix composites |
Scripta Materialia
|
2008-07 |
Synthesis of Ni-based bulk metallic glasses for penetrating materials |
Materials Transactions
|
2008-04 |
Nanocrystallization at shear bands in bulk metallic glass matrix composites |
Scripta Materialia
|
2008-01 |
Deformation behavior of a wrought Mg-Zn-RE alloy at the elevated temperatures |
KOREAN JOURNAL OF METALS AND MATERIALS
|
2007-12 |
재료공학 실험실습 교육과정 개발 |
공학교육연구
|
2007-03 |
Electrochemical properties of a Cu-base metallic glass matrix composite containing LiCoO |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2007-03 |
Ductile Zr-base bulk metallic glass |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2007-03 |
Deformation behavior of nanoparticle/fiber-reinforced nanocrystalline Al-matrix composites |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2006-08 |
고강도 H 형강 및 철근 제조기술 개발 |
재료마당
|
2006-02 |
Deformation behavior of Zr-Al-Cu-Ni-Sn metallic glasses |
JOURNAL OF MATERIALS RESEARCH
|
2006-01 |
나노 결정립 알루미늄 및 알루미늄 합금의 변형거동 |
대한금속·재료학회지
|
2006-01 |
Thermally stable quasicrystalline phase in a superplastic Mg-Zn-Y-Zr alloy |
MATERIALS LETTERS
|
2005-11 |
Ce계 미시메탈이 첨가된 마그네슘 합금의 미세조직 및 기계적 특성 |
대한금속·재료학회지
|
2004-12 |
Superplasticity in a fine-grained Mg-Zn-Y-Zr alloy containing quasicrystalline particles |
MATERIALS TRANSACTIONS
|
2004-08 |
Bulk glass formation in the Ni-Zr-Ti-Nb-Si-Sn alloy system |
JOURNAL OF MATERIALS RESEARCH
|
2004-07 |
Amorphous and icosahedral phases in Ti-Zr-Cu-Ni-Be alloys |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2004-07 |
Effect of liquid temperature on thermal stability and crystallization behavior of Ni-based amorphous alloys |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
2004-06 |
Deformation behavior of a Ni59Zr20Ti16Si2Sn3 metallic glass matrix composite reinforced by copper synthesized by warm extrusion of powders |
JOURNAL OF NON-CRYSTALLINE SOLIDS
|
2004-05 |
A development of Ni-based alloys with enhanced plasticity |
INTERMETALLICS
|
2004-05 |
Deformation behavior of Ni-based metallic glass matrix composites reinforced by brass short-fibers synthesized by warm extrusion of powders |
MATERIALS SCIENCE FORUM
|
2004-03 |
Deformation behavior of Ti-Zr-Ni-Cu-Be metallic glass and composite in the supercooled liquid region |
JOURNAL OF MATERIALS RESEARCH
|
2004-02 |
Effects of Sn addition on the glass forming ability and crystallization behavior in Ni-Zr-Ti-Si alloys |
JOURNAL OF NON-CRYSTALLINE SOLIDS
|
2004-01 |
Mechanical behavior of ni-based metallic glass matrix composites deformed by cold rolling |
MATERIALS LETTERS
|
2003-11 |
Stress-state dependence of cavitations in superplastic aluminum alloys |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
2003-11 |
Stress-state dependence of cavitation and flow behavior in superplastic aluminum alloys |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
2003-09 |
Plasticity in Ni59Zr20Ti16Si2Sn3 metallic glass matrix composites containing brass fibers synthesized by warm extrusion of powders |
APPLIED PHYSICS LETTERS
|