2024-06 |
Evaluation metric of smile classification by peri-oral tissue segmentation for the automation of digital smile design |
Journal of Dentistry
|
2024-04 |
Three-axis load analysis of high-speed handpiece on dental training teeth and computer-aided design/computer-aided manufacturing blocks |
Journal of the Mechanical Behavior of Biomedical Materials
|
2024-04 |
Effects of washing agents on the mechanical and biocompatibility properties of water-washable 3D printing crown and bridge resin |
Scientific Reports
|
2024-04 |
Effects of surface glazing on the mechanical and biological properties of 3D printed permanent dental resin materials |
Journal of Prosthodontic Research
|
2024-01 |
Influence of hydrothermal aging on the shear bond strength of 3D printed denture-base resin to different relining materials |
Journal of the Mechanical Behavior of Biomedical Materials
|
2023-10 |
Deep learning and clustering approaches for dental implant size classification based on periapical radiographs |
Scientific Reports
|
2023-09 |
Exosome membrane-sheathed and multi-stimuli-responsive MnO2 nanoparticles with self-oxygenation and energy depletion abilities potentiate the sonodynamic therapy of hypoxic tumors |
Chemical Engineering Journal
|
2023-08 |
A prospective multicenter clinical study on the efficiency of detachable ball-and spring-retained implant prosthesis |
Journal of Advanced Prosthodontics
|
2023-08 |
Enhanced Bone Formation by Rapidly Formed Bony Wall over the Bone Defect Using Dual Growth Factors |
Tissue Engineering and Regenerative Medicine
|
2023-07 |
Effects of washing solution temperature on the biocompatibility and mechanical properties of 3D-Printed dental resin material |
Journal of the Mechanical Behavior of Biomedical Materials
|
2023-05 |
A comprehensive study on the mechanical effects of implant-supported prostheses under multi-directional loading and different occlusal contact points |
BMC oral health
|
2023-04 |
골격성 III급 부정교합을 가진 환자에서 임플란트 지지 고정성 보철을 이용한 구강회복 증례 |
대한치과보철학회지
|
2023-03 |
Improving Bone Formation by Guided Bone Regeneration Using a Collagen Membrane with rhBMP-2: A Novel Concept |
Journal of Functional Biomaterials
|
2023-01 |
Effects of heat-treatment methods on cytocompatibility and mechanical properties of dental products 3D-printed using photopolymerized resin |
Journal of Prosthodontic Research
|
2022-12 |
Evaluation of the color stability of 3D printed resin according to the oxygen inhibition effect and temperature difference in the post-polymerization process |
Journal of the Mechanical Behavior of Biomedical Materials
|
2022-11 |
Influence of postwashing process on the elution of residual monomers, degree of conversion, and mechanical properties of a 3D printed crown and bridge materials |
Dental Materials
|
2022-10 |
Effect of air abrasion, acid etching, and aging on the shear bond strength with resin cement to 3Y-TZP zirconia |
Journal of the Mechanical Behavior of Biomedical Materials
|
2022-10 |
Effects of Post-Curing Light Intensity on the Mechanical Properties and Three-Dimensional Printing Accuracy of Interim Dental Material |
MATERIALS
|
2022-10 |
Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study |
JOURNAL OF DENTISTRY
|
2022-06 |
Evaluating oxygen shielding effect using glycerin or vacuum with varying temperature on 3D printed photopolymer in post-polymerization |
Journal of the Mechanical Behavior of Biomedical Materials
|
2022-06 |
Accuracy of Bite Registration Using Intraoral Scanner Based on Data Trimming Strategy for Fremitus Teeth |
대한치의학회 영문학회지
|
2022-06 |
Sleeve insert scan body to predict implant placement position by using implant surgical guides: A dental technique |
JOURNAL OF PROSTHETIC DENTISTRY
|
2022-04 |
Influence of different postcuring parameters on mechanical properties and biocompatibility of 3D printed crown and bridge resin for temporary restorations |
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
|
2022-02 |
Evaluating the Precision of Automatic Segmentation of Teeth, Gingiva and Facial Landmarks for 2D Digital Smile Design Using Real-Time Instance Segmentation Network |
Journal of Clinical Medicine
|
2022-02 |
Dental students’ perceptions on a simulated practice using patient- based customised typodonts during the transition from preclinical to clinical education |
EUROPEAN JOURNAL OF DENTAL EDUCATION
|
2021-12 |
Effects of the Washing Time and Washing Solution on the Biocompatibility and Mechanical Properties of 3D Printed Dental Resin Materials |
POLYMERS
|
2021-11 |
Evaluating the three-dimensional printing accuracy of partial-arch models according to outer wall thickness: an in vitro study |
MATERIALS
|
2021-10 |
Evaluation of Dimensional Changes during Postcuring of a Three-Dimensionally Printed Denture Base According to the Curing Time and the Time of Removal of the Support Structure: An In Vitro Study |
APPLIED SCIENCES-BASEL
|
2021-10 |
Evaluation of Dimensional Changes According to Aging Period and Postcuring Time of 3D-Printed Denture Base Prostheses: An In Vitro Study |
MATERIALS
|
2021-10 |
Effects of Artificial Tooth Brushing and Hydrothermal Aging on the Mechanical Properties and Color Stability of Dental 3D Printed and CAD/CAM Materials |
MATERIALS
|
2021-07 |
Alteration of the Occlusal Vertical Dimension for Prosthetic Restoration Using a Target Tracking System |
APPLIED SCIENCES-BASEL
|
2021-05 |
Effect of Acid Mixtures on Surface Properties and Biaxial Flexural Strength of As-sintered and Air-Abraded Zirconia |
MATERIALS
|
2021-04 |
Effects of Postcuring Temperature on the Mechanical Properties and Biocompatibility of Three-Dimensional Printed Dental Resin Material |
POLYMERS
|
2021-04 |
A Comparison of Accuracy of Different Dental Restorative Materials between Intraoral Scanning and Conventional Impression-Taking: An In Vitro Study |
MATERIALS
|
2021-04 |
Restorative Space Analysis by Jaw Motion Tracking Using a Template in Completely Edentulous Patients |
APPLIED SCIENCES-BASEL
|
2021-04 |
Effects of groove sealing of the posterior occlusal surface and the offset of the internal surface on the internal fit and accuracy of implant placement using 3D printed surgical guides: an in vitro study |
POLYMERS
|
2021-03 |
Evaluation of the Trueness of Digital Implant Impressions According to the Implant Scan Body Orientation and Scanning Method |
APPLIED SCIENCES-BASEL
|
2021-02 |
Color and Translucency Stability of Three-Dimensional Printable Dental Materials for Crown and Bridge Restorations |
MATERIALS
|
2021-02 |
Accuracy of Implant Position Reproduction According to Exposed Length of the Scan Body during Optical Scanning: An In Vitro Study |
APPLIED SCIENCES-BASEL
|
2021-02 |
Influence of Edentulous Conditions on Intraoral Scanning Accuracy of Virtual Interocclusal Record in Quadrant Scan |
APPLIED SCIENCES-BASEL
|
2021-01 |
Accuracy Improvement of Intraoral Scanning and Buccal Bite Registration Using Healing Abutment as Landmarks: An In Vitro Study |
APPLIED SCIENCES-BASEL
|
2021-01 |
Mounting casts on a mechanical articulator by using digital multisource data: A dental technique |
JOURNAL OF PROSTHETIC DENTISTRY
|
2020-12 |
Comparison between Occlusal Errors of Single Posterior Crowns Adjusted Using Patient Specific Motion or Conventional Methods |
APPLIED SCIENCES-BASEL
|
2020-11 |
Evaluation of the 3D Printing Accuracy of a Dental Model According to Its Internal Structure and Cross-Arch Plate Design: An In Vitro Study |
MATERIALS
|
2020-11 |
Effects of Post-Curing Time on the Mechanical and Color Properties of Three-Dimensional Printed Crown and Bridge Materials |
POLYMERS
|
2020-11 |
Evaluation of the Color Stability of 3D-Printed Crown and Bridge Materials against Various Sources of Discoloration: An In Vitro Study |
MATERIALS
|
2020-10 |
Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations |
JOURNAL OF PROSTHETIC DENTISTRY
|
2020-07 |
의치진료 경험 후 치과대학 학생들의 임상진료능력에 대한 자기인식도 |
대한치과보철학회지
|
2020-06 |
Effect of Pressure and Particle Size During Aluminum Oxide Air Abrasion on the Flexural Strength of Disperse-Filled Composite and Polymer-Infiltrated Ceramic Network Materials |
POLYMERS
|
2020-04 |
Transfer Learning via Deep Neural Networks for Implant Fixture System Classification Using Periapical Radiographs |
Journal of Clinical Medicine
|
2020-03 |
Digital approach for production of interim implant-supported fixed restoration with a prefabricated implant component library |
JOURNAL OF PROSTHETIC DENTISTRY
|
2020-03 |
a generation process for a three-dimensional digital cast that simulates the oral cavity by using an existing maxillary obturator |
JOURNAL OF PROSTHETIC DENTISTRY
|
2019-09 |
지대주 나사 풀림 방지를 위한 새로운 Lock Screw 시스템의 효과에 대한 유한요소해석적 연구 |
구강회복응용과학지 (구강회복지)
|
2019-08 |
Accuracy of Scanned Stock Abutments Using Different Intraoral Scanners: An In Vitro Study |
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY
|
2019-07 |
편측 소수 잔존치 증례에서 CAD software를 활용한 planning 및 임플란트 서베이드 고정성 보철물을 이용한 국소의치 수복: 증례보고 |
대한치과보철학회지
|
2019-07 |
디지털 스캔 데이터를 활용한 무치악 치조제 관계의 평가와 인공치 선택: 편측 교차교합의 가철성 의치 수복 증례 |
대한치과보철학회지
|
2019-06 |
The Impact of Metal Artifacts Within Cone Beam Computed Tomography Data on the Accuracy of Computer-Based Implant Surgery: An In Vitro Study |
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
|
2019-04 |
A digital implant custom tray fabrication method using the design process for simulating the position of the impression copings and 3D printing technology |
JOURNAL OF PROSTHETIC DENTISTRY
|
2019-03 |
Computer-based implant planning involving a prefabricated custom tray with alumina landmark structures |
JOURNAL OF PROSTHETIC DENTISTRY
|